Classification of dryers

-

 1. Desiccant dryer

(A) heater dryer
(B) heatless dryer

2. Refrigeration dryers


Comments

Post a Comment

if you have any doubts,please let me know

Popular posts from this blog

SemiConductor type strain gauge

-
Image
Semiconductor type strain gauge In this type of strain gauge we use doped silicon or  germanium as a sensing element. When we apply stress to this type of material its Resistance is changed, by measuring the  resistance change we can  measure the stress applied on this material. Gauge factor of this type of strain gauge is well around 100. Unlike other strain gauges, semiconductor strain gages are based upon the piezoresistive effects of silicon or germanium and measure the change in resistance with stress as opposed to strain. The semiconductor bonded strain gage is a wafer with the resistance element diffused into a substrate of silicon. No backing is provided for the wafer element and bonding it to the strained surface needs extra care since only a thin layer of epoxy is used to attach it. Size of a semiconductor strain gauge is much smaller and the cost much lower than for a metallic foil sensor.
Read more

Axial flow compressor

-
Image
Axial flow compressor axial flow compressor is a must see with aerodynamically shaped,radial  blades in both rotor and casing air passes into the machine through The first row of rotor blades and is then redirected into the next and successive Rows by alternates rows of fixed diffusing blades in the casing. flow rating as high as 1,000,000  cubic feet per minute for pressure similar to those of centrifugal machines are available. Axial flow machines are characterized by ess entially constant volume delivery at variable pressure, whereas centrifugal machines deliver practically constant pressure over a variable capacity range . these machines are rarely used for instrument air systems.
Read more

Time of flight sensor

-
Image
Time of flight sensors measure the time it takes something to travel a distance through a medium. Typically, this is the measurement of the time elapsed between the emission of a wave pulse, its reflection off of an object, and its return to the ToF sensor.   TIME-OF-FLIGHT PRINCIPLE The Time-of-Flight principle (ToF) is a method for measuring the distance between a sensor and an object, based on the time difference between the emission of a signal and its return to the sensor, after being reflected by an object. Various types of signals (also called carriers) can be used with the Time-of-Flight principle, the most common being sound and light. TeraRanger sensors use light as their carrier because it is uniquely able to combine higher speed, longer range, lower weight, and eye-safety. By using infrared light we can ensure less signal disturbance and easier distinction from natural ambient light, resulting in the highest performing distance sensors for their given size and...
Read more